Sony DVP-NC85H 사용자 설명서
F:\SONY DVD\2666954112 DVP-
NC85H_US\SOURCE\DVP-
NC85H_US\01US13ADV4-CEK.fm
NC85H_US\SOURCE\DVP-
NC85H_US\01US13ADV4-CEK.fm
master page=right
65
Settings
and Adjus
tments
DVP-NC85H
2-666-954-11(1)
Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
connected.
Select “SCREEN SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” (page 63).
The default settings are underlined.
Display. To use the display, see “Using the
Setup Display” (page 63).
The default settings are underlined.
◆ TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
Note
Depending on the DVD, “4:3 LETTER BOX” may
be selected automatically instead of “4:3 PAN
SCAN” or vice versa.
be selected automatically instead of “4:3 PAN
SCAN” or vice versa.
◆ HDMI RESOLUTION
Selects the type of video signals output from
the HDMI OUT jack. When you select
AUTO (default), the player outputs video
signals of the highest resolution acceptable
for your TV. If the picture is not clear, natural
or to your satisfaction, try another option that
suits the disc and your TV/projector, etc. For
details, refer also to the instruction manual
supplied with the TV/projector, etc.
Selects the type of video signals output from
the HDMI OUT jack. When you select
AUTO (default), the player outputs video
signals of the highest resolution acceptable
for your TV. If the picture is not clear, natural
or to your satisfaction, try another option that
suits the disc and your TV/projector, etc. For
details, refer also to the instruction manual
supplied with the TV/projector, etc.
Notes
• Even when a setting other than “AUTO” is
selected and the connected TV cannot accept the
resolution, the player automatically adjusts the
video signals that are suitable for the TV.
resolution, the player automatically adjusts the
video signals that are suitable for the TV.
• When the HDMI indicator on the front panel
lights up, images from the S VIDEO OUT and
LINE OUT (VIDEO) jacks are enlarged
vertically. (Except when 720
LINE OUT (VIDEO) jacks are enlarged
vertically. (Except when 720
×
480p is selected).
◆ YC
B
C
R
/RGB (HDMI)
Selects the type of HDMI signal output from
HDMI OUT jack.
HDMI OUT jack.
Notes
• If the playback picture becomes distorted, set
“YC
B
C
R
” to “RGB.”
• If the HDMI OUT jack is connected to equipment
with a DVI jack, “RGB” signals will be
automatically output even when you select
“YC
automatically output even when you select
“YC
B
C
R
”.
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
wide-screen TV or a TV with a
wide mode function.
4:3
LETTER
BOX
LETTER
BOX
Select this when you connect a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the
screen.
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the
screen.
4:3
PAN SCAN
PAN SCAN
Select this when you connect a
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
SCREEN SETUP
HDMI RESOLUTION:
SCREEN SAVER:
BACKGROUND:
BACKGROUND:
AUTO
TV TYPE:
16:9
ON
JACKET PICTURE
BLACK LEVEL:
ON
BLACK LEVEL
(COMPONENT OUT)
:
OFF
4:3 OUTPUT:
FULL
YC
B
C
R
YC
B
C
R
/RGB (HDMI):
16:9
4:3 PAN SCAN
4:3 LETTER BOX
AUTO
Normally, select this.
1920
×
1080i
Sends 1920
×
1080i video
signals.
1280
×
720p
Sends 1280
×
720p video
signals.
720
×
480p
Sends 720
×
480p video signals.
YC
B
C
R
Outputs YC
B
C
R
signals.
RGB
Outputs RGB signals.
,
continued