Sony dvp-ns601h 사용자 설명서

• While playing a Super VCD on which the audio 

track 2 is not recorded, no sound will come out 
when you select “2:STEREO,” “2:1/L,” or 
“2:2/R.”

• When playing in DVD-VR mode: If you connect 

to an audio component using the DIGITAL OUT 
(COAXIAL or OPTICAL)/HDMI OUT jack and 
want to switch between the sound tracks, set 
“DOLBY DIGITAL” to “D-PCM” in “AUDIO 
SETUP” (page 59).

• If “MODE (MP3, JPEG)” is set to “AUTO” or 

“AUTO (BGM)” (page 50), you can hear the 
player’s internal background sound when MP3 is 
not played.

You can check the audio signal format by 
pressing AUDIO repeatedly during playback. 
The format of the current audio signal (Dolby 
Digital, DTS, PCM, etc.) appears as shown 
below.

Dolby Digital 5.1 ch

Audio signals recorded in a disc contain the 
sound elements (channels) shown below. 
Each channel is output from a separate 
speaker.
• Front (L)
• Front (R)
• Center
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either 

the Dolby Surround Sound processed 
signals or the Dolby Digital sound’s 
monaural rear audio signals.

• LFE (Low Frequency Effect) signal

If “DTS” is set to “OFF” in “AUDIO SETUP” 
(page 59), the DTS track selection option will not 
appear on the screen even if the disc contains DTS 
tracks.

1:ENGLISH DOLBY DIGITAL

3 / 2 .1

Rear (L/R)

Front (L/R) 
+ Center

LFE (Low Frequency 
Effect)