Sony dvp-ns905v 사용자 설명서
29
H
ook
up
s
s
13
Press ENTER.
◆ When “DIGITAL OUTPUT” is selected
in Step 9
• Quick Setup is finished and
in Step 9
• Quick Setup is finished and
connections are complete.
• If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 76).
“MPEG” (page 76).
◆ When “DIGITAL & 5.1CH OUTPUT” is
selected in Step 9
• The Setup Display for “SPEAKER
selected in Step 9
• The Setup Display for “SPEAKER
SETUP” appears.
14
Press X/x to select the size of the
centre speaker.
If no centre speaker is connected, select
“NONE” (page 77).
“NONE” (page 77).
15
Press ENTER.
“REAR” is selected.
16
Press X/x to select the size of the
rear speakers.
If no rear speaker is connected, select
“NONE.”
“SIDE” and “REAR” refer to the speaker
position relative to your listening
position (page 77).
“NONE.”
“SIDE” and “REAR” refer to the speaker
position relative to your listening
position (page 77).
17
Press ENTER.
“SUBWOOFER” is selected.
18
Press X/x to select whether or
not you have connected a
subwoofer.
19
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
and setup operations are complete.
Enjoying the surround sound
effects
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 23 to
25 (
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 23 to
25 (
through
). Each of these is the
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 70 for using the Setup Display.
when you first connect the player. Refer to
page 70 for using the Setup Display.
Audio Connection (pages 22 to 25)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 75).
• If the sound distorts even when the volume
is turned down, set “AUDIO ATT” to “ON”
(page 75).
(page 75).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 75).
• Set “DIGITAL OUT” to “ON” (page 75).
• Set “48kHz/96kHz PCM” to “96kHz/24bit,”
• Set “48kHz/96kHz PCM” to “96kHz/24bit,”
only if you connect an amplifier (receiver)
that conforms to the 96 kHz sampling
frequency (page 76).
that conforms to the 96 kHz sampling
frequency (page 76).
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
SMALL
LARGE
NONE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
To set, press
, then
.
ENTER
NONE
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
NONE
LARGE(REAR)
NONE
LARGE
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
To set, press , then .
ENTER
ENTER
NONE
NONE
YES
LARGE(REAR)
B
D
A
B-1
C-1
B-2
C-2
D-2
,
continued