Sony DVW-M2000 사용자 설명서
Chapter 5
Editing
5-15
Chapter 5
Editing
Notes
• In preread editing, if an input video signal is used as
the reference signal for the output video signal, this
forms a feedback loop. To prevent the occurrence of
feedback, set the OUTREF in function menu page 4
to REF, and set item 309 in the extended setup menu
to AUTO 1 so as to use an external reference signal.
forms a feedback loop. To prevent the occurrence of
feedback, set the OUTREF in function menu page 4
to REF, and set item 309 in the extended setup menu
to AUTO 1 so as to use an external reference signal.
• When the preread mode is selected, to prevent
feedback due to the loop connection, whatever the
editing mode of this unit, no E-E video output is
available.
When the PREREAD is set to OFF after preread
editing, however, if the loop connection remains and
an E-E signal is output, feedback will occur.
To prevent this, select PB mode for the video and
digital audio channels in all the modes before the
preread editing, as follows.
editing mode of this unit, no E-E video output is
available.
When the PREREAD is set to OFF after preread
editing, however, if the loop connection remains and
an E-E signal is output, feedback will occur.
To prevent this, select PB mode for the video and
digital audio channels in all the modes before the
preread editing, as follows.
1
Set PB/EE in function menu HOME page to PB.
2
Set the PREREAD in function menu page 4 to ON.
3
Make the necessary connections for the preread
editing.
editing.
4
After selecting the desired insert editing mode,
carry out the preread editing.
carry out the preread editing.
5
When the preread editing is completed, remove the
connections.
connections.
6
Set the PREREAD to OFF.
7
Check that no loop connection remains.