Sony dvw-500p-1 사용자 설명서
1-6
BKDW-515
1-8. Extension of Control Panel
Notes when connecting the two BKDW-515
. Setup Setting Data
The Current Setup setting data inside of the BKDW-515
is transferred to the VTR just after the communication
between the BKDW-515 and VTR are established. The
between the BKDW-515 and VTR are established. The
ALARM LED on the front panel blinks during the data
communication is incomplete.
communication is incomplete.
When the two BKDW-515 are connected to a single
VTR, last setting data out of two is written over the
VTR, last setting data out of two is written over the
former data as the effective setting data.
If the two BKDW-515 with different data setting are
If the two BKDW-515 with different data setting are
connected to a single VTR, and if the power is turned to
ON simultaneously, un-defined setting data will be sent
ON simultaneously, un-defined setting data will be sent
to the VTR. Therefore, first, connect either BKDW-515
to a single VTR for storing the Current Setup setting data
to a single VTR for storing the Current Setup setting data
in bank memory of VTR or in the memory card before-
hand. After that, connect the two BKDW-515 to a single
hand. After that, connect the two BKDW-515 to a single
VTR, turn on the power of both BKDW-515, then copy
the memorized data into Current Setup. The Current
the memorized data into Current Setup. The Current
Setup setting data among the two BKDW-515 and VTR
will be automatically renewed to keep the contents of
will be automatically renewed to keep the contents of
data identical.
. VTR Control
Control of VTR is set by an INT/EXT selection of the
System Setup Panel and ITEM 117 “CONTROL PAN-
EL SELECTION” of the setup menu.
EL SELECTION” of the setup menu.
Notes when connection the BKDW-514 and
BKDW-515 (Extender)
BKDW-515 (Extender)
When connecting the BKDW-514 and BKDW-515
(Extender) to VTR, be sure to turn on the power of
BKDW-515 first. If the power of BKDW-515 is in off,
BKDW-515 first. If the power of BKDW-515 is in off,
start up a menu system (SETUP MENU BANK 1/2/3/4:
BANK 4 is effective from SYS-V3.01 and later) of DVW-
BANK 4 is effective from SYS-V3.01 and later) of DVW-
500 series, therefore the contents set with BKDW-515 can
not be used. If MENU lamps 1, 2, and 3 on the indicator
not be used. If MENU lamps 1, 2, and 3 on the indicator
section of VTR’s upper control panel are off, the contents
set with BKDW-515 can be used.
set with BKDW-515 can be used.
Pay attention when pressing the MENU button without
pressing the SET button after renewing the Setup setting
pressing the SET button after renewing the Setup setting
data with BKDW-514, because renewed data will be
validated if both BKDW-514 and BKDW-515 have been
validated if both BKDW-514 and BKDW-515 have been
connected regardless of SET button. However, renewed
data will be invalidated if the only BKDW-514 has been
data will be invalidated if the only BKDW-514 has been
connected.