Sony HT-DDW750 사용자 설명서
Additional Information
HT-DDW750 4-244-183-11(1) GB
49
GB
Speaker section
Models of area code CEL, CEK only
• SS-MSP2 for front and surround speakers
• SS-CNP2 for center speaker
Models of other area code
• SS-MSP75 for front and surround speakers
• SS-CNP75 for center speaker
• SS-MSP2 for front and surround speakers
• SS-CNP2 for center speaker
Models of other area code
• SS-MSP75 for front and surround speakers
• SS-CNP75 for center speaker
Speaker system
Full range, magnetically
shielded
shielded
Speaker units
70 mm
× 100 mm cone
type
Enclosure type
Bass reflex
Rated Impedance
8 ohms
Power handling capacity (Maximum input
power)
power)
100 W
Sensitivity level
SS-MSP2/SS-CNP2
SS-MSP2/SS-CNP2
85 dB (1 W, 1 m)
SS-MSP75/SS-CNP75
86 dB (1 W, 1 m)
Frequency range
160 Hz – 20,000 Hz
Dimensions (w/h/d)
SS-MSP2
SS-MSP2
Approx. 81
× 141 × 121
mm (3 1/4
× 5 5/8 × 4 7/8
inches)
SS-CNP2
Approx. 230
× 81 × 121
mm (9 1/8
× 3 1/4 × 4 7/8
inches)
SS-MSP75
Approx. 90
× 150 × 124.5
mm (3 5/8
× 6 × 5 inches)
SS-CNP75
Approx. 230
× 90 × 127
mm (9 1/8
× 3 5/8 × 5
inches)
Mass
SS-MSP2/SS-MSP75
SS-MSP2/SS-MSP75
Approx. 0.8 kg
(1 lb 13 oz)
(1 lb 13 oz)
SS-CNP2/SS-CNP75
Approx. 1.0 kg
(2 lb 4 oz)
(2 lb 4 oz)
SA-WMSP75 for models of area code U, CA
only
SA-WMSP85 for models of other area code
only
SA-WMSP85 for models of other area code
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
HARMONIC DISTORTION:
With 6 ohm loads, from 28 – 200 Hz;
rated 75 watts (SA-WMSP75)/100 watts
(SA-WMSP85), minimum RMS power, with
no more than 0.8% total harmonic distortion
from 250 milliwatts to rated output (Models of
area code U only).
rated 75 watts (SA-WMSP75)/100 watts
(SA-WMSP85), minimum RMS power, with
no more than 0.8% total harmonic distortion
from 250 milliwatts to rated output (Models of
area code U only).
Speaker system
Active subwoofer,
magnetically shielded
magnetically shielded
Speaker unit
Woofer: 20 cm cone type
Enclosure type
Acoustically loaded bass
reflex
reflex
Continuous RMS power output
(6 ohms, 20 – 250 Hz)
SA-WMSP75
(6 ohms, 20 – 250 Hz)
SA-WMSP75
75 W
SA-WMSP85
100 W
Reproduction frequency range
28 Hz – 200 Hz
High frequency cut-off frequency
150 Hz
Input
LINE IN (input pin jacks)
Power requirements
Area code
Power requirements
U, CA, MX
120 V AC, 60 Hz
CEL, CEK, SP, AU 230 V AC, 50/60 Hz
E2/E3
120/220/230 V AC, 50/60 Hz
Power consumption
SA-WMSP75
SA-WMSP75
75 W
SA-WMSP85
100 W
Dimensions (w/h/d)
Approx. 270
× 325 × 398
mm (10 3/4
× 12 7/8 × 15
3/4 inches) including front
panel
panel
Mass
SA-WMSP75
SA-WMSP75
Approx. 9.0 kg
(19 lb 14 oz)
(19 lb 14 oz)
SA-WMSP85
Approx. 10.0 kg
(22 lb 1 oz)
(22 lb 1 oz)
continued
01GB10ADDCA.p65
11/29/02, 2:24 PM
49