Sony HTSS380 사용자 설명서

 

 

 

 

 

 

 

• Check that the equipment is connected 

correctly to the HDMI jack for that 
equipment. 

• Make sure “CTRL HDMI” is set to 

“CTRL ON” in HDMI menu.

• You cannot listen to the Super Audio CD 

by connecting HDMI.

• Depending on the playback equipment, 

you may need to set up the HDMI setting 
of the equipment. Refer to the operating 
instructions supplied with each 
equipment.

• Be sure to use a High Speed HDMI cable 

when you view images or listen to sound, 
especially for the Deep Color (Deep 
Colour) or 3D transmission.

• Make sure the TV is compatible with the 

System Audio Control function.

• If you cannot listen to the sound of the 

equipment connected to the receiver while 
TV input is selected
– Be sure to change the input of the 

receiver to HDMI when you want to 
watch a program on the equipment 
connected via HDMI connection to the 
receiver.

– Change the TV channel when you want 

to watch a TV broadcast.

– Be sure to select the correct equipment 

or input you want when you watch a 
program from the equipment connected 
to the TV. Refer to the operating 
instructions of the TV on this operation.

• Adjust the volume of this receiver.
• The DOCK FOR iPod/iPhone and/or 

equipment is not connected correctly. 
Turn off the receiver, then reconnect the 
DOCK FOR iPod/iPhone and/or 
equipment.

• Make sure you have connected the video 

output of your video equipment to the TV.

• Move your audio equipment away from 

the TV.

• Make sure you have connected the video 

output of your DOCK FOR iPod/iPhone to 
the TV.

• Check that the equipment is connected 

correctly to the HDMI jack for that 
equipment.

• Depending on the playback equipment, 

you may need to set up the equipment. 
Refer to the operating instructions 
supplied with each equipment.

• Be sure to use a High Speed HDMI cable 

when you view images or listen to sound, 
especially for the 1080p, Deep Color 
(Deep Colour) or 3D transmission.

• When the receiver enters into standby 

mode, the image is from the last HDMI 
equipment selection before you turned off 
the receiver. If you are enjoying other 
equipment, play the equipment and 
perform the One-Touch Play operation, or 
turn on the receiver to select the HDMI 
equipment you want to enjoy.

• Make sure “PASS THRU” is set to “ON” 

in the HDMI menu if you connect 
equipment not compatible with the 
“BRAVIA” Sync to the receiver (page 43).

• Depending on the TV or the video 

equipment, 3D images may not be 
displayed.