Sony IT-ID20 사용자 설명서
Getting Started
13
US
Getting Started
6
Enter three digits of the local area code using
the dialing keys.
the dialing keys.
7
Press (PGM).
The number next to the selected number will
flash.
flash.
Repeat steps 5 to 7 to enter a local area code
into another number, if necessary.
into another number, if necessary.
To end the setting, press (ERASE/CLEAR).
Note
Do not allow more than 20 seconds to elapse between each step of the
procedure.
Do not allow more than 20 seconds to elapse between each step of the
procedure.
To change the local area code
1
Display the local area code you want to change by steps
from 1 to 5 on page 12.
from 1 to 5 on page 12.
The current local area code appears on the display.
2
Enter a new local area code by pressing the dialing keys.
3
Press (PGM).
The display returns to “NEW OLD” of the initial mode.
Tip
You can also correct a digit in step 2. Press V or v until the digit to be corrected
flashes and enter a digit by pressing the dialing keys.
You can also correct a digit in step 2. Press V or v until the digit to be corrected
flashes and enter a digit by pressing the dialing keys.
When you do not use the entered local area code
Enter “000” by pressing the dialing keys in step 2 above.
#1 #2 #3 #4 #5