Sony LBT-ZUX9 사용자 설명서

You can use manual tuning to tune in a 
station with a weak signal if you know the 
frequency of the station.
Use buttons on the remote for the 
operation.

You can also use TUNING +/– on the 
unit.

When tuner reception is poor, set the CD/
USB power manage function to “CD/USB 
POWER OFF”. The default setting is 
“CD/USB POWER ON”.
Use buttons on the unit for the operation.

Press CD

.

Press 

"/1 

to turn off the system.

Press 

"/1 

while holding down 

x

.

The system turns on automatically. 
“CD/USB POWER OFF” appears in 
the display.

Repeat the procedure above and “CD/
USB POWER ON” appears in the display.

• When “CD/USB POWER OFF” is selected, 

disc and USB device access time is increased.

• There is no power supply to USB device 

during TUNER function with the CD/USB 
power manage function is set to “CD/USB 
POWER OFF”. Therefore, when a USB 
device is connected, it cannot be recognized.

The factory setting for AM tuning interval 
is 9 kHz (or 10 kHz for some areas).
Use the buttons on the unit for the 
operation.

Press TUNER/BAND repeatedly 
until “AM” lights up in the display.

Press 

"/1

 to turn off the system.

Press 

"/1 

while holding down 

ENTER.

The system turn on automatically.
“AM 9K STEP” or “AM 10K STEP” 
appears in the display.

When you change the interval, all the AM 
preset stations are erased.

• To improve broadcast reception, adjust the 

supplied antennas, or connect an external 
antenna.

• When an FM stereo program has static noise, 

press FM MODE on the remote repeatedly 
until “MONO” lights up in the display. There 
will be no stereo effect, but the reception will 
improve.