Sony fst-zx80d 사용자 설명서

So
un
d Ad

stmen

Tips

• “PRO LOGIC” lights up in the display when Pro

Logic decoding is performed.

• “PRO LOGIC II” lights up in the display when

Pro Logic II Movie/Music mode decoding is
performed.

• “LINK” lights up in the display when “LINK” is

selected.

• “VIRTUAL” lights up in the display when

“HP VIRTUAL” is selected.

• “VIRTUAL” and “DCS” light up in the display when

“V.M.DIM.” is selected.

(FST-ZX100D/LBT-ZX100D/
MHC-GN1000D only)

You can use the subwoofer to enhance the bass.

Press SUBWOOFER ON/OFF on the
subwoofer repeatedly until the
indicator lights up.

The subwoofer is turned on.
You will be able to listen to low bass
frequency sound.

Turn SUBWOOFER LEVEL to adjust
the level.

To turn off the subwoofer

Press SUBWOOFER ON/OFF on the
subwoofer again.

Tip

To adjust the volume of all speakers at the same time,
press VOLUME +/– repeatedly (or turn MASTER
VOLUME on the unit).

— X-TRANCE/X-TRANCE PRO

You can create a party environment by using
X-TRANCE (MHC-GN1000D only) or
X-TRANCE PRO (FST-ZX100D/
LBT-ZX100D/FST-ZX80D/LBT-ZX80D
only).
The following table shows the sound effect
available for X-TRANCE and X-TRANCE
PRO.
Use the buttons on the unit for the operation.

Flashing sound effect

— SOUND FLASH

(MHC-GN1000D only)
With the sound flash function, you can flash the
sound output. The sound cuts off periodically.

Hold down SOUND FLASH during
playback.

The flashing effect is activated.

To cancel the flashing effect

Release SOUND FLASH.

To change the sound flash speed

Hold down SOUND FLASH and turn
OPERATION DIAL clockwise or
counterclockwise to change the sound flash
speed (1 ~ 20).

Tip

• The power illuminator will synchronize with the

selected SOUND FLASH effect.

Using the subwoofer

Creating a party
environment

Sound effect

X-TRANCE X-TRANCE PRO

SOUND FLASH

•

FLANGER

•

DELAY

•

CHORUS

•

X-ROUND

•

X-BEAT

•

continued