Sony fst-zx80d 사용자 설명서

• You cannot select the Play Timer and the Timer 

Recording at the same time.

• If you use the Play Timer and the Sleep Timer at the 

same time, the Sleep Timer has priority.

• The Play Timer will not be activated if the system is 

turned on or if “STANDBY” flashes in the display.

• The system turns on 30 seconds before the preset 

time.

• When Play Timer is selected, “PLAY” lights up in 

the display.

You can record from a preset radio station from 
a specified time.
To make timer recording, you must first preset 
the radio station (see “Presetting radio stations” 
on page 51) and set the clock (see “Setting the 
clock” on page 14).

V

 

 

v

“ON” appears and the hour indication 
flashes in the display.

Press 

V

 or 

v

 repeatedly to set the hour, 

then press ENTER.

The minute indication flashes in the 
display.

Press 

V

 or 

v

 repeatedly to set the minute, 

then press ENTER.
“OFF” appears and the hour indicator 
flashes in the display.

The type of timer (“REC”), followed by the 
start time, the stop time and the preset radio 
station to be recorded (e.g., “TUNER FM 
5”) appears in the display in sequence 
before the original display returns.

Make sure the tape is in the front side.

g

j

When recording from the reverse side, press 
FUNCTION +/– (or TAPE A/B on the unit) 
repeatedly to select “TAPE B”. Then, press 
H

 

(or nN on the unit) repeatedly until 

the TAPE B reverse side indicator lights up 
to start playback of the reverse side. Press 
x at the point where you want to start 
recording.
When you record on both sides, be sure to 
start from the front side. If you start from 
the reverse side, recording stops at the end 
of reverse side.

?/1

Check the setting

Press TIMER MENU.
“TIMER SELECT?” flashes 
in the display.

Press ENTER.

Press 

V

 or 

v

 repeatedly to 

select “PLAY SELECT?”, 
then press ENTER.

Change the setting

Start from step 1.

Cancel the Play 
Timer

Press TIMER MENU.
“TIMER SELECT?” flashes 
in the display.

Press ENTER.

Press 

V

 or 

v

 repeatedly to 

select “TIMER OFF?”, then 
press ENTER.