Sony MDS-E10 사용자 설명서
20
Recor
ding on MDs
Recording for long times
In addition to normal stereo recording, this recorder has
two long time recording modes: LP2 and LP4. When
recording in LP2 stereo mode, you can record 2 times the
normal recordable time, and in LP4 Stereo mode, you can
record 4 times the normal recordable time. In addition, the
recordable time for monaural recording is approximately
double the stereo recording time.
two long time recording modes: LP2 and LP4. When
recording in LP2 stereo mode, you can record 2 times the
normal recordable time, and in LP4 Stereo mode, you can
record 4 times the normal recordable time. In addition, the
recordable time for monaural recording is approximately
double the stereo recording time.
Note
MDs recorded in MD LP (LP2 or LP4 Stereo) mode cannot
be played back on a recorder that does not support MD LP
mode. In addition, you cannot perform S.F Edit for MDs
recorded in MD LP mode.
MDs recorded in MD LP (LP2 or LP4 Stereo) mode cannot
be played back on a recorder that does not support MD LP
mode. In addition, you cannot perform S.F Edit for MDs
recorded in MD LP mode.
MENU / NO
YES
AMS
1
Do steps 1 to 5 of “Recording on an MD” on page
18.
18.
2
Press MENU/NO twice.
“Set Up Menu” is displayed.
“Set Up Menu” is displayed.
3
Turn AMS (or press ./> repeatedly) to display
“Rec Mode” and press AMS.
“Rec Mode” and press AMS.
4
Turn AMS to select record mode and press AMS or
YES.
YES.
To record in
Display to be selected
Stereo
Stereo
Monaural
Mono
LP2 stereo
Long 2
LP4 stereo
Long 4
“LP2,” “LP4,” or “MONO” lights
up on the lower left of the display
window by the selected mode.
up on the lower left of the display
window by the selected mode.
5
Press MENU/NO.
6
Do steps 6 to 10 of “Recording on an MD” on page
18.
18.
Hidden “LP:” is recorded at the beginning of
tracks during MD LP recording.
This is a confirmation stamp indicating no play when play
is performed by the non-MD LP component. The stamp is
not displayed by playable MD LP components, but is
displayed when play is performed by the non-MD LP
component.
If the name of the MD LP-recorded track is copied as the
name of the MONO or STEREO recorded track, “LP:” is
displayed (page 48).
tracks during MD LP recording.
This is a confirmation stamp indicating no play when play
is performed by the non-MD LP component. The stamp is
not displayed by playable MD LP components, but is
displayed when play is performed by the non-MD LP
component.
If the name of the MD LP-recorded track is copied as the
name of the MONO or STEREO recorded track, “LP:” is
displayed (page 48).
The digital output connectors of the mini-disk
recorder output the signal input from the digital
input connectors as it is during recording or
recording pause.
Use an input monitor function (page 21) when only a built-
in sampling rate converter is used.
recorder output the signal input from the digital
input connectors as it is during recording or
recording pause.
Use an input monitor function (page 21) when only a built-
in sampling rate converter is used.