Sony MDS-E10 사용자 설명서
45
Editing Recor
ded MDs
Dividing Tracks (DIVIDE)
This function allows you to divide recorded material that
has multiple tracks but only one track number, or to set a
new beginning point in the middle of a track.
has multiple tracks but only one track number, or to set a
new beginning point in the middle of a track.
Example: Dividing the second track
AAA
B1
B2
CCC
1
2
3
AAA
BBB
BBB
B1
B2
CCC
1
2
3
4
When you divide a track, the total number of tracks are
automatically increased by one and renumbered.
automatically increased by one and renumbered.
Dividing a track after selecting a track
1
Press MENU/NO while the recorder is stopped,
playing, or paused.
“Edit Menu” appears in the display.
playing, or paused.
“Edit Menu” appears in the display.
2
Turn AMS (or press ./> repeatedly) until
“Divide?” appears in the display; press AMS or YES.
“Divide?” appears in the display; press AMS or YES.
3
Turn AMS (or press ./> repeatedly) until the
number of the track you want to divide appears,
then press AMS or YES.
“-Rehearsal-” appears, press AMS or YES, and a few
seconds of the track from that point repeatedly play
back.
number of the track you want to divide appears,
then press AMS or YES.
“-Rehearsal-” appears, press AMS or YES, and a few
seconds of the track from that point repeatedly play
back.
4
While monitoring the sound, turn AMS (or press
.
.
/> repeatedly) to locate the dividing point
The position is moved one frame* (f) at a time (one
frame = 1/86 sec.).
* Monaural tracks or tracks recorded in LP2 stereo
frame = 1/86 sec.).
* Monaural tracks or tracks recorded in LP2 stereo
move two frames at a time; LP4 stereo tracks move
four frames at a time.
four frames at a time.
To quickly find a point
Press m/M repeatedly in step 4 to select the
position by frame, second, or minute. The selected unit
flashes in the display.
Press m/M repeatedly in step 4 to select the
position by frame, second, or minute. The selected unit
flashes in the display.
5
Repeat step 4 until you’ve located the proper
dividing point
dividing point
6
Press AMS or YES.
“Complete!” appears for a few seconds, the track is
divided, and the recorder begins to playback the new
track. The new track is not given a new track name.
“Complete!” appears for a few seconds, the track is
divided, and the recorder begins to playback the new
track. The new track is not given a new track name.
To cancel the operation
Press MENU/NO or x.
Press MENU/NO or x.
z
You can divide tracks while recording.
For details, see “Marking Track Numbers While
Recording” on page 23.
For details, see “Marking Track Numbers While
Recording” on page 23.
Dividing a track after selecting the
dividing point
dividing point
1
While the recorder is playing, press (7) at the
point where you want to divide the track
point where you want to divide the track
2
Press MENU/NO.
“Edit Menu” appears in the display.
“Edit Menu” appears in the display.
3
Turn AMS (or press ./> repeatedly) until
“Divide?” appears in the display; press AMS or YES.
“Divide?” appears in the display; press AMS or YES.
4
If needed, refer to step 4 of “Dividing a track after
selecting a track” on page 45, and adjust the
position.
selecting a track” on page 45, and adjust the
position.
5
Press AMS or YES.
“Complete” appears for a few seconds, the track is
divided, and the recorder begins to play back the new
track. The new track is not given a new track name.
“Complete” appears for a few seconds, the track is
divided, and the recorder begins to play back the new
track. The new track is not given a new track name.
To cancel the operation
Press MENU/NO or x.
Press MENU/NO or x.
z
You can divide tracks while recording
For details, see “Marking Track Numbers While
Recording” on page 23.
For details, see “Marking Track Numbers While
Recording” on page 23.