Sony MDS-JE520 사용자 설명서
11
EN
Recording on MDs
Notes
• When you turn off the Smart Space Function, the Auto Cut
Function is also turned off automatically.
• The Smart Space Function and Auto Cut Function are
factory set to on.
• If you turn off the deck or disconnect the AC power cord,
the deck will recall the last setting (On or Off) of the Smart
Space and Auto Cut Functions the next time you turn on
the deck.
Space and Auto Cut Functions the next time you turn on
the deck.
Playing back tracks just recorded
Do this procedure to immediately play back tracks that
have just been recorded.
have just been recorded.
Press · immediately after stopping recording.
Playback starts from the first track of the material just
recorded.
Playback starts from the first track of the material just
recorded.
To play from the first track of the MD after
recording
recording
1 Press p again after stopping recording.
2 Press ·.
2 Press ·.
Playback starts from the first track of the MD.
Recording Over Existing Tracks
Follow the procedure below to record over existing
material just as you would on an analog cassette tape.
material just as you would on an analog cassette tape.
1
Do Steps 1 to 5 in “Recording on an MD” on
page 6.
page 6.
2
Turn AMS (or press = or +) until the
number of the track to be recorded over appears.
number of the track to be recorded over appears.
3
To record from the start of the track, continue
from Step 6 in “Recording on an MD” on page 7.
from Step 6 in “Recording on an MD” on page 7.
z
While “Tr” flashes in the display
The deck is recording over an existing track, and stops
flashing when it reaches the end of the recorded
portion.
flashing when it reaches the end of the recorded
portion.
z
To record from the middle of the track
1 After Step 2 above, press · to start playback.
2 Press P where you want to start recording.
3 Continue from Step 6 in “Recording on an MD” on
2 Press P where you want to start recording.
3 Continue from Step 6 in “Recording on an MD” on
page 7.
Note
You cannot record from the middle of an existing track when
the “PROGRAM” or “SHUFFLE” is on.
the “PROGRAM” or “SHUFFLE” is on.
≠
AMS
±
p
0
)
r
·
§
EJECT
P
≠ AMS ±
NUM
CHAR
WRITE
CLEAR
NAME
+
STANDBY
=
START
P
STOP
T.REC
MUSIC SYNC
0
=
·
)
+
r
P
p
CD-SYNC
CD PLAYER
FADER
LEVEL
=/+