Sony MDS-JE520 사용자 설명서
Additional Information
44
EN
Table of Setup Menus
You can make various settings on this deck by using Setup Menus. Operation related to each menu were explained
in the previous sections. The table below outlines each menu, including the various parameters and initial settings.
in the previous sections. The table below outlines each menu, including the various parameters and initial settings.
To enter the Setup Menu
While the deck is stopped, press MENU/NO twice to display “Setup Menu”,
or
press MENU/NO to display “Edit Menu” and turn AMS until “Setup ?” appears in the
display, then press AMS.
press MENU/NO to display “Edit Menu” and turn AMS until “Setup ?” appears in the
display, then press AMS.
Menu number
Function
Parameters
Initial setting
See
01
Creates a program.
page 23
—
—
02
Sets the track marking function.
T.Mark Off, T.Mark LSyn
T.Mark LSyn
page 14
03
Sets the reference level of the input
signal when “T.Mark LSyn” is
selected in Setup Menu 02.
signal when “T.Mark LSyn” is
selected in Setup Menu 02.
LS(T) –72 to –0dB
LS(T) –50dB
page 14
04
Turns the Auto Space and Auto
Pause Functions on and off.
Pause Functions on and off.
Auto Off, Auto Space, Auto Pause
Auto Off
page 25
05
Turns the Smart Space and Auto
Cut Functions on and off.
Cut Functions on and off.
S.Space Off, S.Space On
S.Space On
page 10
06
Turns the Peak Hold Function on
and off for the peak level meters.
and off for the peak level meters.
P.Hold On, P.Hold Off
P.Hold Off
page 12
07
Sets the playing time during music
scan.
scan.
M.Scan 6 to 20s
M.Scan 6s
page 21
08
Sets the duration of fade-in
recording and playback.
recording and playback.
F.in 1.0 to 15.0s
F.in 5.0s
page 17
09
Sets the duration of fade-out
recording and playback.
recording and playback.
F.out 1.0 to 15.0s
F.out 5.0s
page 17
10
Adjusts the analog signal level
input through the LINE
(ANALOG) IN jacks.
input through the LINE
(ANALOG) IN jacks.
Ain –
∞
to +12.0dB
Ain 0.0dB
page 13
11
Adjusts the digital signal level input
through the DIGITAL OPTICAL IN
connector.
through the DIGITAL OPTICAL IN
connector.
Opt –
∞
to +12.0dB
Opt 0.0dB
page 12
12
Adjusts the digital signal level input
through the DIGITAL COAXIAL IN
connector.
through the DIGITAL COAXIAL IN
connector.
Coax –
∞
to +12.0dB
Coax 0.0dB
page 12
13
Adjusts the analog signal level
output to the LINE (ANALOG) OUT
and PHONES jacks.
output to the LINE (ANALOG) OUT
and PHONES jacks.
Aout –20.0 to 0.0dB
Aout 0.0dB
page 25
14
Sets the duration of the Sleep Timer. Sleep 30 to 120min
Sleep 60min
page 27
15
Turns the Sleep Timer Function on
and off.
and off.
Sleep On, Sleep Off
Sleep Off
page 27