Sony MHC-GNZ888D 사용자 설명서

다운로드
페이지 96
76
GB
There is no sound from the center/
surround speaker (MHC-GNZ888D 
only).
• Set the center/surround speaker level to 
the appropriate level.
• The software being played back has 
limited sound effects. Check the volume 
with the test tone (page 51).
• Check that the center/surround speakers 
are connected securely and correctly.
• Make sure that “SURROUND” is set to 
“SIDE” or “BEHIND” (page 50).
• Make sure that “CENTER” is set to 
“YES” (page 50).
Sound lacks bass.
• Check that the speaker’s + and – 
terminals are connected correctly.
Disc Player
The disc tray does not open and 
“LOCKED” appears in the display.
• Consult your nearest Sony dealer or 
local authorized Sony service facility.
The disc tray does not close.
• Load the disc correctly.
• Always close the disc tray by pressing 
Z OPEN/CLOSE on the unit. Do not 
forcibly push the disc tray to close it as 
this may cause a malfunction.
The disc does not eject.
• You cannot eject the disc during CD 
Synchro Recording. Press x to cancel 
the CD Synchro Recording, then press 
Z OPEN/CLOSE on the unit to eject the 
disc.
• Consult your nearest Sony dealer.
Playback does not start.
• Open the disc tray and check whether a 
disc is loaded.
• Wipe the disc clean (page 83).
• Reload the disc.
• Load the disc that this system can play 
• Load the disc on the disc tray with the 
label side facing up.
• Remove the disc and wipe away the 
moisture on the disc, then leave the 
system turned on for a few hours until 
the moisture evaporates.
• Press 
H
 (or nN on the unit) to start 
playback.
• The region code on the DVD VIDEO 
does not match the system.
• Cancel the Custom Parental Control 
function (page 43).
The sound skips.
• Wipe the disc clean (page 83).
• Reload the disc.
• Move the unit to a place without 
vibration (e.g., on top of a stable stand).
• Move the speakers away from the unit, 
or place them on separate stands. When 
you listen to a track with bass sounds at 
high volume, the speaker vibration may 
cause the sound to skip.
Playback does not start from the first 
track.
• The system is in Program Play or 
Shuffle Play mode. Turn off Program 
Play and Shuffle Play.
• Resume Play has been selected. Press x 
twice. Then, press 
H
 (or nN on 
the unit) to start playback (page 30).
• The title of DVD VIDEO or PBC menu 
automatically appears on the TV screen.
Playback starts automatically.
• The DVD VIDEO features an auto 
playback function.