Sony MHC-GRX40AV 사용자 설명서
11
VOLUME
ALL DISCS
ß
Preset number
2
Press and hold + or – until the
frequency indication starts to
change, then release.
frequency indication starts to
change, then release.
Scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
3
Press TUNER MEMORY.
A preset number flashes in the display.
4
Press ENTER/NEXT.
The station is stored.
5
Repeat steps 1 to 4 to store other
stations.
stations.
To tune in a station with a weak
signal
signal
Press + or – repeatedly in step 2 to tune in the
station manually.
station manually.
To set another station to the exist
preset number
preset number
Start over from step 1. After step 3, press + or
– repeatedly to select the preset number you
want to store the station.
– repeatedly to select the preset number you
want to store the station.
To erase a preset number
1 Press and hold TUNER MEMORY until the
preset number flashes in the display.
2 Press + or – repeatedly to select the preset
number you want to erase.
If you want to erase all preset numbers,
select “ALL ERASE”.
If you want to erase all preset numbers,
select “ALL ERASE”.
3 Press ENTER/NEXT.
When you erase a preset number, the total
number of preset stations decreases by one.
You can add a new preset number after the
last preset number.
When you erase a preset number, the total
number of preset stations decreases by one.
You can add a new preset number after the
last preset number.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
you unplug the power cord or if a power failure
occurs.
MONO
TUNED
STEREO
MHz
kHz
VOLUME
ALL DISCS
ß