Sony MHC-GNZ55D 사용자 설명서

I D-LIGHT SYNC OUT jack

Connect the D-LIGHT SYNC Controller 
(not supplied) to this jack. You need to connect 
the D-LIGHT SYNC Controller to a lighting 
device* (not supplied). The lighting device will 
react according to the control signals transmitted 
by the D-LIGHT SYNC Controller upon 
receiving music source from the system. 
For details on the use of the D-LIGHT SYNC 
Controller and lighting device, refer to the 
operating instructions supplied with the 
respective device.

* Refer to the operating instructions supplied 

with the D-LIGHT SYNC Controller for the 
recommended lighting device.

The lighting effect may be different depending on the 
connected lighting device or the type of music being 
played back.

Use the buttons on the unit for the operation.

Hold down TV/SAT and press ?/1 while the 
system is turned on. Release ?/1 first, then 
release TV/SAT. The system switches the 
function from “TV” to “SAT” or vice versa.

If the sound is distorted or too loud when “TV” is 
selected, change the function to “SAT”.

Start playing the connected VCR.

The video signal from the connected VCR

 

is only 

output through the VIDEO OUT jack of this unit.

You can press FUNCTION +/– repeatedly to select 
“TV”, “SAT” or “VIDEO”.

For the speakers placement, refer to the 
operating instructions supplied with the 
connected amplifier.

D-LIGHT SYNC 

Controller cord