Sony MHC-GNZ77D 사용자 설명서
84
GB
I D-LIGHT SYNC OUT jack
Connect the D-LIGHT SYNC Controller
(not supplied) to this jack. You need to connect
the D-LIGHT SYNC Controller to a lighting
device* (not supplied). The lighting device will
react according to the control signals transmitted
by the D-LIGHT SYNC Controller upon
receiving music source from the system.
For details on the use of the D-LIGHT SYNC
Controller and lighting device, refer to the
operating instructions supplied with the
respective device.
(not supplied) to this jack. You need to connect
the D-LIGHT SYNC Controller to a lighting
device* (not supplied). The lighting device will
react according to the control signals transmitted
by the D-LIGHT SYNC Controller upon
receiving music source from the system.
For details on the use of the D-LIGHT SYNC
Controller and lighting device, refer to the
operating instructions supplied with the
respective device.
* Refer to the operating instructions supplied
with the D-LIGHT SYNC Controller for the
recommended lighting device.
recommended lighting device.
Note
The lighting effect may be different depending on the
connected lighting device or the type of music being
played back.
connected lighting device or the type of music being
played back.
(Except for MHC-GNZ55D)
Listening to a connected TV
or satellite tuner
or satellite tuner
Use the buttons on the unit for the operation.
1
Connect the audio cords.
2
Press TV/SAT.
To switch between the “TV” and
“SAT” function
“SAT” function
Hold down TV/SAT and press ?/1 while the
system is turned on. Release ?/1 first, then
release TV/SAT. The system switches the
function from “TV” to “SAT” or vice versa.
system is turned on. Release ?/1 first, then
release TV/SAT. The system switches the
function from “TV” to “SAT” or vice versa.
Note
If the sound is distorted or too loud when “TV” is
selected, change the function to “SAT”.
selected, change the function to “SAT”.
Listening to a connected VCR
1
Connect the audio and video cords.
2
Press VIDEO on the unit.
Start playing the connected VCR.
Note
The video signal from the connected VCR
is only
output through the VIDEO OUT jack of this unit.
Tip
You can press FUNCTION +/– repeatedly to select
“TV”, “SAT” or “VIDEO”.
“TV”, “SAT” or “VIDEO”.
(MHC-GNZ77D/MHC-GNZ55D only)
1
Connect the digital optical cord.
2
Connect the speakers to an optional
amplifier equipped with a decoder.
amplifier equipped with a decoder.
For the speakers placement, refer to the
operating instructions supplied with the
connected amplifier.
operating instructions supplied with the
connected amplifier.
3
Start playing a multi channel source,
such as a DVD VIDEO.
such as a DVD VIDEO.
4
Select the audio format you want.
Listening to audio from a
connected component
connected component
D-LIGHT SYNC
Controller cord
Enjoying the multi
channel sound with the
optional amplifier
channel sound with the
optional amplifier