Sony MHC-GNV111D 사용자 설명서

Turn on the TV and select the video input so that 
you can view the pictures from this system.

Connect the video deck to the TV using a video 
cord (not supplied). However, do not connect 
this unit to the TV through the video deck. 
Otherwise, you may experience video leakage 
when watching video images from this system. 
Connect this unit directly to the TV as shown 
below.

For even higher quality video images:

– Use optional component video cords to connect the 

COMPONENT VIDEO input jacks on your TV to 
the COMPONENT VIDEO OUT jacks of this unit. If 
your TV is compatible with progressive format file 
signals, use this connection and press 
PROGRESSIVE on the unit repeatedly until 
“P AUTO” or “P VIDEO” appears in the display 
(page 54).

– You can use an optional S Video cord to connect the 

S VIDEO input jack on your TV to the S VIDEO 
OUT jack of this unit.

6 For models equipped with a voltage 

Depending on the model, the VOLTAGE 
SELECTOR may differ.

*  Saudi Arabian model : 120 - 127V

7 Connect the power cord to a wall 

The demonstration appears in the display. 
When you press 

?/1

, the system turns on 

and the demonstration automatically ends. 
If the supplied adaptor on the plug does not 
fit your wall outlet, detach it from the plug 
(only for models equipped with an adaptor).

8 (Except for Latin American and 

The default setting for color system is 
different depending on the area.
Each time you perform the procedure 
below, the color system changes as follows:
NTSC 

y

 PAL

Use buttons on the unit for the operation.

Press ?/1 to turn off the system for the 
operation.

Press ?/1 while holding down X. 

The system turns on automatically and 
the color system is changed.
“COLOR NTSC” or “COLOR PAL” 
appears in the display.

• Keep the speaker cords away from the antennas to 

prevent noise.

• Be sure to match the color of the speaker terminals on 

the unit and the connectors.

• Be sure to connect the speakers securely and 

correctly. When connecting speaker cords, insert the 
connector straight into the terminals. 

• The type of speakers supplied vary according to the 

model you purchased (see “Specifications” on 
page 98).

• You cannot set the color system in the Power Saving 

Mode (see “Turning off the display” on page 79).

• When you play back a VIDEO CD recorded in a 

different color system from the one you set to the 
unit, the picture image may be distorted.

See “Hooking up optional components” on 
page 85.

VOLTAGE SELECTOR

220V

120V

*

230-240V