Sony MHC-NXM1 사용자 설명서
Ge
tting Star
tting Star
te
d
7
GB
Note
Keep the antennas away from the speaker cords.
3
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
VOLTAGE SELECTOR to the local
power line voltage.
Refer to the print on your system’s
VOLTAGE SELECTOR for available
settings.
VOLTAGE SELECTOR for available
settings.
* Saudi Arabian model: 120 – 127 V
4
Connect the power cord to a wall
outlet.
outlet.
The demonstration appears in the display.
When you press
When you press
?/1, the system turns on
and the demonstration automatically ends.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
detach the supplied plug adaptor (only for
models equipped with an adaptor).
Inserting two R6 (size AA)
batteries into the remote
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
months. When the remote no longer operates the
system, replace both batteries with new ones.
Attaching the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
of the speakers to stabilize the speakers and
prevent them from slipping.
AM
FM 75
Ω
CO
AXIAL
Extend the FM lead antenna horizontally
AM loop antenna
When carrying this system
Perform the following procedure to protect
the CD mechanism.
Use buttons on the unit for the operation.
the CD mechanism.
Use buttons on the unit for the operation.
1
Make sure that all discs are removed
from the system.
from the system.
2
Press CD.
3
Hold down
x
and then press CD until
“LOCK” appears.
4
Unplug the power cord.