Sony MHC-W555 사용자 설명서

The following measured at AC 230 V, 50/60 Hz
DIN power output (rated)

95 + 95 watts
(6 ohms at 1 kHz, DIN)

Continuous RMS power output

110 + 110 watts
(6 ohms at 1 kHz,
10% THD)

The following measured at AC 120, 220, 240 V, 50/

60 Hz

DIN power output (rated)

100 + 100 watts
(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

120 + 120 watts
(6 ohms at 1 kHz,
10% THD)

Peak music power output 2000 watts
Inputs

MD/VIDEO 1 IN (phono
jacks): voltage 450/250
mV, impedance 47
kilohms
AV INPUT AUDIO
(phono jacks):
voltage 250 mV,
impedance 47 kilohms
MIX MIC (phono jack):
sensitivity 1 mV,
impedance 10 kilohms

Outputs

MD/VIDEO 1 OUT
(phono jacks): voltage
450/250 mV, impedance
1 kilohm
PHONES (stereo phone
jack): accepts headphones
of 8 ohms or more.
FRONT SPEAKER:
accepts impedance of 6 to
16 ohms
REAR SPEAKER: accepts
impedance of 16 ohms
SUPER WOOFER:
voltage 1 V, impedance
1 kilohm

Inputs

AV INPUT VIDEO
(phono jack):
1 Vp-p, 75 ohms

Outputs

MONITOR OUT
(phono jack):
1 Vp-p, 75 ohms

System

Compact disc and digital
audio system

Laser

Semiconductor laser
(

λ=780nm)

Emission duration:
continuous

Laser output

Max. 44.6 

µW*

*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.

Frequency response

20 Hz – 20 kHz (±1 dB)

Wavelength

780 – 790 nm

Signal-to-noise ratio

More than 90 dB

Dynamic range

More than 90 dB

CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength

600 nm

Output Level

–18 dBm

Recording system

4-track 2-channel stereo

Frequency response

40 – 13,000 Hz (±3 dB),

(DOLBY NR OFF)

using Sony TYPE I
cassette
40 – 14,000 Hz (±3 dB),
using Sony TYPE II
cassette

Wow and flutter

±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)