Sony MHC-RG475S 사용자 설명서
8
GB
6 Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
Inserting two R6 (size AA)
batteries into the remote
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
months. When the remote no longer operates the
system, replace both batteries with new ones.
Attaching the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
of the speakers to stabilize the speakers and
prevent them from slipping.
Front speaker (Left (4)/Right (4))
Sub woofer (4)*
Sub woofer (4)*
* MHC-GX555/RG575S/RG475S only
When carrying this system
Perform the following procedure to protect
the CD mechanism. Use buttons on the unit
for the operation.
the CD mechanism. Use buttons on the unit
for the operation.
1
Press ?/1 to turn on the system, then
press CD to switch the function to CD.
press CD to switch the function to CD.
2
Make sure that all discs are removed
from the system.
from the system.
3
Hold down CD and then press ?/1 until
“STANDBY” appears.
“STANDBY” appears.
After a few seconds later, “STANDBY”
disappears and “LOCK” appears.
disappears and “LOCK” appears.
4
Unplug the power cord.