Sony RDR-GX310 사용자 설명서
21
H
ook
up
s and
s and
Se
tti
tti
n
gs
Step 7: Easy Setup
Make the basic adjustments by following the on-
screen instructions in “Easy Setup.”
screen instructions in “Easy Setup.”
1
Turn on the recorder and switch the input
selector on your TV so that the signal from
the recorder appears on your TV screen.
selector on your TV so that the signal from
the recorder appears on your TV screen.
The message about the initial settings appears.
• If this message does not appear, select “Easy
• If this message does not appear, select “Easy
Setup” from “SETUP” in the System Menu
to run “Easy Setup” function (“Settings and
Adjustments” on page 68).
to run “Easy Setup” function (“Settings and
Adjustments” on page 68).
2
Press ENTER.
Follow the on-screen instructions to make the
following settings.
following settings.
OSD
Select the language for the on-screen displays.
Tuner System
Select “ELSE-English,” regardless of your
area of language.
The programme position order will be set.
To set the programme positions manually, see
page 68.
area of language.
The programme position order will be set.
To set the programme positions manually, see
page 68.
Clock
Set the clock manually using
</M/m/,
, and
press ENTER.
TV Type
If you have a wide-screen TV, select “16:9.”
If you have a standard TV, select either “4:3
Letter Box” (shrink to fit) or “4:3 Pan Scan”
(stretch to fit). This will determine how
“wide-screen” images are displayed on your
TV.
If you have a standard TV, select either “4:3
Letter Box” (shrink to fit) or “4:3 Pan Scan”
(stretch to fit). This will determine how
“wide-screen” images are displayed on your
TV.
Audio Connection
If you connected an AV amplifier (receiver)
using either a digital optical or coaxial cord,
select “Yes: DIGITAL OUT” and set the
digital output signal (page 75).
using either a digital optical or coaxial cord,
select “Yes: DIGITAL OUT” and set the
digital output signal (page 75).
3
Press ENTER when “Finish” appears.
“Easy Setup” is finished.
To return to the previous step
Press
O RETURN.
z Hints
• If your AV amplifier (receiver) has an MPEG audio
• If your AV amplifier (receiver) has an MPEG audio
decoder, set “MPEG” to “MPEG” (page 75).
• If you want to run “Easy Setup” again, select “Easy
Setup” from “SETUP” in the System Menu (page 79).
1
2
3
4
6
7
8
9
0
5
[/1
</M/m/,,
ENTER
ENTER
O RETURN
PROG +/–