Sony RDR-GX7 사용자 설명서

다운로드
페이지 96
34
Labelling, Protecting, or Finalizing the Disc
Press M/m to select “Protect Disc,” then press 
ENTER.
The display for setting disc protection appears. 
Press </, to select “Protect,” then press 
ENTER.
The display returns to the Disc Information display.
Press RETURN to turn off the display.
To cancel the disc protection
1
Repeat steps 1 to 3 above.
The display for setting disc protection appears. 
2
Press 
</, to select “Don’t Protect.”
The display returns to the Disc Information display.
3
Press RETURN to turn off the display.
Finalizing a disc (Finalize)
Finalizing is necessary when you play discs recorded with this 
recorder on other DVD equipment.
Before finalizing, check the differences between the disc types 
on the table below. 
When you finalize a DVD-RW (Video mode), DVD+RW, or 
DVD-R, a title menu will be automatically created, which can be 
displayed on other DVD equipment. 
When a finalized disc is in the recorder, the FINALIZED 
indicator lights up on the front panel.
Differences between the disc types
Press TOOL while the disc is in the recorder.
The Tool menu appears.
Press M/m to select “Disc Info,” then press 
ENTER.
The Disc Information display appears.
Press M/m to select “Finalize,” then press 
ENTER.
The display shows the approximate time required for 
finalizing and asks for confirmation.
Press </, to select “OK,” then press 
ENTER.
The recorder starts finalizing the disc.
To unfinalize a disc
If you cannot record or edit on the DVD-RW (VR mode) that has 
been finalized with other DVD equipment (a message appears), 
unfinalize the disc.
Select “Unfinalize” in step 3 above.
z
Hint
You do not need to finalize a disc again once the disc has been finalized 
with this recorder.
Notes
• Depending on the condition of the disc, recording, or the DVD 
equipment, discs may not play even when the discs are finalized.
• The recorder may not be able to finalize the disc if it was recorded on 
another recorder.
Erasing all the titles on the disc (Erase 
All)
You can erase all the titles on the disc except the titles you have 
set protection.
The disc name and recording format remain the same.
Press TOOL while the disc is in the recorder.
The Tool menu appears.
Finalizing is unnecessary when playing a disc 
on VR format compatible equipment.
You may need to finalize the disc depending on 
the DVD equipment, or if the recording time is 
short. You can edit or record on the disc even 
after finalizing.
Finalizing is unnecessary, since DVD+RWs are 
automatically finalized when removed from the 
recorder. However, you may need to finalize the 
disc by following the steps below for certain 
DVD equipment, or if the recording time is 
short. You can edit or record on the disc even 
after finalizing.
Finalizing is necessary when playing on 
equipment other than this recorder. After 
finalizing, you cannot edit or record on the disc. 
If you want to record on it again, reformat the 
disc (page 35). However, all contents recorded 
in the disc will be erased.
Finalizing is necessary when playing on 
equipment other than this recorder. After 
finalizing, you cannot edit or record on the disc.
Protect Disc
Select the protection status for this disc.
Protect
Don't Protect
Disc Information
DiscName Movie
Close
Media
DVD-RW
Format
VR
Title no.
Original 3 / Playlist 2
Protected
Not Protected
Date
15. 9. 2003 ~  28. 10. 2003
HQ : 0H30M
LP  : 2H00M
HSP : 1H00M
EP  : 3H00M
SP : 1H30M
2. 3 / 4. 7GB
SLP  : 4H00M
Remainder
Disc Name
Format
Erase All
Finalize
Protect Disc
Finalize
About xx min is needed for finalizing this disc.
Cannot cancel finalizing during transaction.
Do you want to finalize?
OK
Cancel