Sony rdr-gx355 사용자 설명서
26
Checking the cable box/satellite
receiver control setting
receiver control setting
1
Turn on the recorder and the cable box/
satellite receiver.
satellite receiver.
2
Point the recorder’s remote at the recorder
(not at the cable box/satellite receiver).
(not at the cable box/satellite receiver).
3
Press CH +/– and check that the channel
changes on the cable box/satellite receiver
window.
changes on the cable box/satellite receiver
window.
4
Press the number buttons and check that
the channel changes on the cable box/
satellite receiver window.
the channel changes on the cable box/
satellite receiver window.
If you cannot get the recorder to control your
cable box/satellite receiver
cable box/satellite receiver
Check the settings at “Set Top Box Control” in
“Features” setup (page 82).
Check the connection and place the set top box
controller near the cable box/satellite receiver
(page 12).
If your cable box or satellite receiver still does not
operate with this recorder, contact your cable or
satellite company to see if they can provide you
with a compatible cable box or satellite receiver.
“Features” setup (page 82).
Check the connection and place the set top box
controller near the cable box/satellite receiver
(page 12).
If your cable box or satellite receiver still does not
operate with this recorder, contact your cable or
satellite company to see if they can provide you
with a compatible cable box or satellite receiver.
To fix the set top box controller to your cable
box/satellite receiver
box/satellite receiver
Once you have confirmed that the set top box
controller controls your cable box or satellite
receiver, affix it in place.
controller controls your cable box or satellite
receiver, affix it in place.
1
Attach the supplied double-sided tape to the
set top box controller.
Remove the backings on the double-sided
tape.
set top box controller.
Remove the backings on the double-sided
tape.
2
Affix it so that the set top box controller is
near the remote control sensor on your cable
box/satellite receiver.
near the remote control sensor on your cable
box/satellite receiver.