Sony rdr-vxd655 사용자 설명서
79
VCR
R
e
co
rdi
n
n
g
z
Hints
• When the start time and the channel or input source to
be recorded are the same but the “Media” setting
differs, the program is recorded to both the DVD disc
and the VHS tape.
differs, the program is recorded to both the DVD disc
and the VHS tape.
• You can also turn on the timer programming menu
from the System Menu. Press SYSTEM MENU to
select “Timer,” and select “Timer-Standard.”
select “Timer,” and select “Timer-Standard.”
• You can use the number buttons and the dot (·) button
to select a channel.
• You can select a video source from the LINE 1 IN or
LINE 2 IN jacks, using the INPUT button.
Notes
• To record a cable or satellite program, turn on the cable
box or satellite receiver and select the program you
want to record. Leave the cable box or satellite receiver
turned on until the recorder finishes recording.
want to record. Leave the cable box or satellite receiver
turned on until the recorder finishes recording.
• Even when correctly set, the program may not be
recorded if another recording is underway, or other
prioritized timer setting overlaps.
prioritized timer setting overlaps.
• You cannot record on a tape with its safety tab
removed.
• Before the timer recording starts, “TIMER REC”
flashes in the front panel display.
• The recorder automatically turns off when a timer
recording finishes, even if the recording started with
the recorder turned on.
the recorder turned on.
• Digital closed captions cannot be recorded (page 35).
• For audio settings, “Stream 1” is usually recorded
• For audio settings, “Stream 1” is usually recorded
• When you set the Digital Rating, a program with a
digital rating beyond your limit setting cannot be
recorded correctly (page 103).
recorded correctly (page 103).
Recording From Connected
Equipment With a Timer
(Synchro Rec)
Equipment With a Timer
(Synchro Rec)
You can set the recorder to automatically record
programs from connected equipment that has a
timer function (such as a satellite tuner). Connect
the equipment to the LINE 1 IN jacks on the rear
of the recorder (page 18).
When the connected equipment turns on, the
recorder starts recording a program from the LINE
1 IN jacks.
programs from connected equipment that has a
timer function (such as a satellite tuner). Connect
the equipment to the LINE 1 IN jacks on the rear
of the recorder (page 18).
When the connected equipment turns on, the
recorder starts recording a program from the LINE
1 IN jacks.
1
Press VIDEO to operate the VCR.
2
Insert a tape with its safety tab in place.
3
Press REC MODE repeatedly to select the
recording mode, “SP” or “EP.”
recording mode, “SP” or “EP.”
4
Press SYSTEM MENU while the recorder is
in stop mode.
in stop mode.
5
Select “Setup,” and press ENTER.
6
Select “Features,” and press ENTER.
The “Features” setup appears.
7
Select “Synchro Recording,” and press
ENTER.
ENTER.
SYNCHRO
REC
REC
x STOP
REC MODE
SYSTEM
MENU
M/m/</,,
ENTER
ENTER
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
0
0
9
9
VIDEO
,continued