Sony SDM-S204 사용자 설명서

다운로드
페이지 349
8
Setup 3: Bundle the cords and 
cables
1
Slide up the back cover.
2
Remove the stand cover.
3
Secure the video signal cables using the cable 
holder on the cabinet.
4
Feed the power cord through the hole on the left of 
the stand and secure the power cord and video 
signal cables using the cable holder.
5
Replace the stand cover and then slide down the 
back cover.
Please be sure that cords come out through the opening at the 
bottom of the stand cover, for proper placement of the stand 
cover.
Setup 4: Turn on the monitor and 
computer
1
Press the MAIN POWER switch located on the right 
side of the monitor in the direction of the 
[, if it is not 
already pressed. Make sure the 
1 (power) indicator 
is lit in red.
Note
The monitor is factory shipped with the MAIN POWER switch set 
to on ([).
2
Press the 1 (power) switch on the front right of the 
monitor.
The 1 (power) indicator lights up in green.
3
Turn on the computer.
4
Press the INPUT button to select the desired input 
signal.
The selected input’s picture appears on the screen.
For more information, see “Selecting the input signal (INPUT 
button)” on page 10.
The installation of your monitor is complete. If necessary, use the 
monitor’s controls to adjust the picture (page 11).
back cover
2
1
4
5
3
cable holder
stand 
cover
5
MAIN POWER
lights in red
lights in green
INPUT