Sony slv-se300d1-d2 사용자 설명서
10
Connecting the VCR
If your TV has a Scart (EURO-AV) connector
Note
• If the TV is connected to the LINE-1 (TV) connector, setting the RF channel to OFF is
recommended. In the OFF position, only the signal from the aerial is output through the
AERIAL OUT connector (see page 15).
AERIAL OUT connector (see page 15).
1
Disconnect the aerial cable from your
TV and connect it to AERIAL IN on
the rear panel of the VCR.
TV and connect it to AERIAL IN on
the rear panel of the VCR.
2
Connect AERIAL OUT of the VCR
and the aerial input of your TV using
the supplied aerial cable.
and the aerial input of your TV using
the supplied aerial cable.
3
Connect LINE-1 (TV) on the VCR
and the Scart (EURO-AV) connector
on the TV with the optional Scart
cable.
and the Scart (EURO-AV) connector
on the TV with the optional Scart
cable.
This connection improves picture and
sound quality. Whenever you want to
watch the VCR picture, press t TV/
VIDEO to display the VIDEO
indicator in the display window.
sound quality. Whenever you want to
watch the VCR picture, press t TV/
VIDEO to display the VIDEO
indicator in the display window.
4
Connect the mains lead to the mains.
Mains lead
i
LINE-1
(TV)
AERIAL IN
Scart (EURO-AV)
to mains
Aerial cable (supplied)
AERIAL OUT
: Signal flow
Scart cable (not supplied)
AERIAL IN
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE