Sony SLV-SX717E 사용자 설명서
91
Troubleshooting
Ad
di
di
tiona
l
In
form
a
tion
Master Page : Right
filename[010ADDI.FM] model name1[SLV-SE610A/E] model name2[SLV-SE710D/E]
model name3[SLV-SX710D/E] model name4[SLV-SX717D/E]
model name5[SLV-SE810D/E] model name6[SLV-SX810D]
[3-065-674-E1 (1)]
Oth
e
rs
A tape cannot be
inserted.
inserted.
• Check that a tape isn’t already in the tape compartment.
The remote commander
does not function.
does not function.
• Make sure you are pointing the remote commander at the
remote sensor on the VCR.
• Replace all the batteries in the remote commander with
new ones if they are weak.
• Make sure the [TV] / [VIDEO] remote control switch is set
correctly.
The selected input line
connector number does
not appear in the display
window.
connector number does
not appear in the display
window.
• Check that DECODER/LINE3 (or DECODER/LINE2) in
the OPTIONS-2 menu is set to LINE3 (or LINE2) (see
page 82).
page 82).
The SMARTLINK
function does not work.
function does not work.
• Check that your TV complies with SMARTLINK,
MEGALOGIC, EASYLINK, Q-Link, EURO VIEW
LINK, or T-V LINK.
LINK, or T-V LINK.
• Make sure you use the Scart cable to connect the VCR and
your TV.
• Make sure the Scart cable is connected securely.
The tracking meter does
not appear on the TV
screen.
not appear on the TV
screen.
• The recording condition of the tape is very poor and
tracking cannot be adjusted.
• The tracking meter does not appear when playing back an
NTSC-recorded tape.
You cannot control other
TVs.
TVs.
• Set your TV’s code number. The code number may change
when you replace the batteries of the remote commander.
The display window
becomes dim.
becomes dim.
• The display window automatically becomes dim when the
VCR is in standby or timer recording mode.
The VCR needs to be
cleaned.
cleaned.
• Clean the cabinet, panel and controls with a dry, soft cloth,
or a soft cloth slightly moistened with a mild detergent
solution. Do not use any type of solvent, such as alcohol or
benzine.
solution. Do not use any type of solvent, such as alcohol or
benzine.
Symptom
Remedy
Symptoms caused by contaminated video heads
• Normal picture
• Rough picture
initial
contamination
contamination
• Unclear picture
• No picture (or
black & white
screen appears)
screen appears)
terminal