Sony ST-SDB900 사용자 설명서

다운로드
페이지 28
12
GB
This section shows you how to store up to 99 of 
your favorite DAB, 30 of FM or 30 of AM 
stations manually onto preset numbers.
1
Press BAND repeatedly to select DAB, 
FM or AM for the desired type of 
broadcast.
2
Press TUNING MODE repeatedly so 
that the tuner is set to automatic or 
manual tuning mode.
Manual tuning mode is only available with 
FM and AM band reception.
3
Turn TUNING/SELECT to tune in the 
station you want to store.
4
Press MEMORY.
“MEMORY” appears along with the preset 
number and the previously stored station. 
The default station presets are as follows: 
DAB: DAB01 (Empty), FM: FM01 87.50 
MHz, AM: AM01 531 kHz.
5
Turn TUNING/SELECT to select the 
desired number.
6
Press ENTER. 
The tuner stores the service/station at the 
preset number. Any previously stored 
service/station is overwritten.
7
Repeat steps 1 through 6 to store other 
stations.
Tips
• When tuning in AM stations, adjust the direction of 
the AM loop aerial for optimum reception.
• If the STEREO indicator remains off, switch to 
• If an FM stereo programme seems distorted, switch 
page 17). You will not have the stereo effect but the 
distortion will be reduced.
Notes
• When you preset a DAB or RDS station that is 
broadcasting station name information, the station 
name is automatically stored in the station preset.
• The DAB INIT SCAN procedure clears all DAB 
presets.
Storing stations manually
BAND
ENTER
MEMORY
TUNING/SELECT
TUNING MODE