Sony STR-DB798 사용자 설명서
masterpage:Left
lename[E:\SEM_Janet\Revision
Data\J9051275_2598516131DB798CEL\2598516131\GB06ADV_STR-DB798-CEL.fm]
42
GB
model name1[STR-DB798]
[2-598-516-13(1)]
Tip
Surround speaker position is designed specifically for
implementation of the Cinema Studio EX modes.
implementation of the Cinema Studio EX modes.
For other sound fields, speaker position is not so
critical. Those sound fields were designed under the
premise that the surround speakers would be located
behind the listening position, but presentation remains
fairly consistent even with the surround speakers
positioned at a rather wide angle. However, if the
speakers are pointing toward the listener from the
immediate left and right of the listening position, the
surround effects becomes unclear unless set to “PL.
SIDE”.
critical. Those sound fields were designed under the
premise that the surround speakers would be located
behind the listening position, but presentation remains
fairly consistent even with the surround speakers
positioned at a rather wide angle. However, if the
speakers are pointing toward the listener from the
immediate left and right of the listening position, the
surround effects becomes unclear unless set to “PL.
SIDE”.
Nevertheless, each listening environment has many
variables, like wall reflections, and you may obtain
better results using “PL. BEHD” if your speakers are
located high above the listening position, even if they
are to the immediate left and right.
variables, like wall reflections, and you may obtain
better results using “PL. BEHD” if your speakers are
located high above the listening position, even if they
are to the immediate left and right.
Therefore, although it may result in a setting contrary
to the above explanation, we recommend that you
playback multi channel surround encoded software and
select the setting that provides a good sense of
spaciousness and that best succeeds in forming a
cohesive space between the surround sound from the
surround speakers and the sound of the front speakers.
If you are not sure which sounds best, select “PL.
BEHD” and then use the speaker distance parameter
and speaker level adjustments to obtain proper balance.
to the above explanation, we recommend that you
playback multi channel surround encoded software and
select the setting that provides a good sense of
spaciousness and that best succeeds in forming a
cohesive space between the surround sound from the
surround speakers and the sound of the front speakers.
If you are not sure which sounds best, select “PL.
BEHD” and then use the speaker distance parameter
and speaker level adjustments to obtain proper balance.
x
HGT. XXXX
(Surround speaker height)*
Lets you specify the height of your surround speakers
for proper implementation of the surround effects of
the Cinema Studio EX modes (page 33).
for proper implementation of the surround effects of
the Cinema Studio EX modes (page 33).
• LOW
Select if the height of your surround speakers
corresponds to section A.
corresponds to section A.
• HIGH
Select if the height of your surround speakers
corresponds to section B.
corresponds to section B.
* This setup item is not available when the surround
speaker size parameter is set to “NO”.
x SP > XXX Hz
(Speaker crossover frequency)*
Initial setting: 100 Hz
Lets you adjust the bass crossover frequency of
speakers in SPEAKER SETUP menu. You can adjust
the bass crossover frequency from 40 Hz to 160 Hz in
10 Hz steps.
speakers in SPEAKER SETUP menu. You can adjust
the bass crossover frequency from 40 Hz to 160 Hz in
10 Hz steps.
* This setup item is only available when at least one
speaker is set to “SMALL” and the corresponding
speaker segment flashes in the display.
speaker segment flashes in the display.
SL
SR
60
30
A
B
A
B
GB01COV_STR-DB798-CEL.book Page 42 Thursday, August 18, 2005 8:59 AM