Sony SVT-S480ES 사용자 설명서
10
Connecting a Switcher
Turn all the power off before making connections.
Connect the AC power cord last.
Connect the AC power cord last.
Connecting a Camera, Monitor
and Microphone
and Microphone
With the following connections, you can monitor the
picture and sound.
picture and sound.
Connections
to
VIDEO
OUT
VIDEO
OUT
Camera switcher
to EXT
TIMING
IN
TIMING
IN
Video camera
Monitor
to video output
Use of BNC connector
Align pin with cutout, insert and
turn right to lock.
To remove, turn left and pull out.
turn right to lock.
To remove, turn left and pull out.
Microphone
to MIC IN
to VIDEO IN
to AC
IN
IN
to a wall outlet
to video
input
input
to VIDEO
IN
IN
to SW OUT
to MONITOR OUT
Video camera
Monitor
If the equipment to be connected has an S-
VIDEO connector
VIDEO connector
You can connect to this VCR’s S-VIDEO jacks using
an S-VIDEO cable.
If both S-VIDEO and VIDEO IN jacks are used at the
same time, the equipment connected to the S-VIDEO
IN jack has priority.
an S-VIDEO cable.
If both S-VIDEO and VIDEO IN jacks are used at the
same time, the equipment connected to the S-VIDEO
IN jack has priority.
To connect an alarm sensor
Refer to page 35.
Note
When you connect several cameras to a switcher,
synchronize the cameras.
If not, the picture will be disturbed.
synchronize the cameras.
If not, the picture will be disturbed.
S-VIDEO
IN/OUT
IN/OUT