Sony ta-av581 사용자 설명서

9

When you press TV CONTROL to watch a TV program,
the TV turns on and switches to the TV input.  The TV
also turns on when you press VIDEO and switches to
the appropriate video input.
If the TV does not switch to the appropriate input
automatically, press TV/VIDEO.

Press TV CONTROL to set the remote to operate only
the TV. When you press this button, the TV turns on
and switches to the TV input. If the TV does not switch
to the TV input automatically, press TV/VIDEO.

Some Sony TVs can not be controlled by this remote.

If the factory settings of the SYSTEM CONTROL/
FUNCTION buttons (page 8) don’t match your system
components, you can change them. For example, if you
have two CD players and you don’t have a tape deck
or an MD deck, you can assign the TAPE button to
your second CD player.

Note that the settings of the TUNER and PHONO
buttons cannot be changed.

Hold down the SYSTEM CONTROL/FUNCTION
button whose function you want to change
(TAPE, for example).

Press the corresponding numeric button of the
component you want to assign to the SYSTEM
CONTROL/FUNCTION button (1 - CD player,
for example).

1

2

3

4

5

6

7

8

9

10

>10

CD player

DAT deck

MD deck

Tape deck A

Tape deck B

LD player

VCR (remote control mode VTR 1*)

VCR (remote control mode VTR 2*)

VCR (remote control mode VTR 3*)

TV

DBS

The numeric buttons are assigned to select the
functions as follows:

* Sony VCRs are operated with a VTR 1, 2 or 3 setting.

These correspond to Beta, 8mm and VHS
respectively.

Now you can use the TAPE button to control a
second CD player.

Repeat the above procedure.