Sony tc-kb820s 사용자 설명서
Additional Information
11
EN
Notes on Cassette Tapes
To protect the recording
Break off the record-protect tab for side A or B.
To record on a tape having a broken tab
Cover the record-protect tab hole for side A or B with
adhesive tape.
adhesive tape.
When you are using a type II or type IV tape, be careful not
to cover the detector slots that the deck uses to determine the
tape type.
to cover the detector slots that the deck uses to determine the
tape type.
On tapes longer than 90 minutes
We do not recommend the use of tapes longer than
90 minutes except for a long continuous recording or
playback. They are very thin and tend to be stretched easily.
90 minutes except for a long continuous recording or
playback. They are very thin and tend to be stretched easily.
On handling cassettes
• To prevent the heads and tape path from getting dirty,
avoid touching the tape surface of a cassette.
• Place cassettes away from equipment with magnets, such
as speakers and amplifiers; it may cause tape distortion or
erase the recordings.
erase the recordings.
• Do not expose cassettes to direct sunlight, extremely cold
temperature or moisture.
Side A
Tab for side B
Tab for side A
Type II
Type IV
Detector slots
Detector slots
Cleaning
Cleaning the heads and tape path
Clean the heads and tape path of the tape deck after
every 10 hours of operation to guard against:
• a decrease in sound level
• excessive wow or flutter
• sound dropout
• incomplete erasure
To ensure better recording, we recommend that you
clean the heads and tape path before every recording.
every 10 hours of operation to guard against:
• a decrease in sound level
• excessive wow or flutter
• sound dropout
• incomplete erasure
To ensure better recording, we recommend that you
clean the heads and tape path before every recording.
1
Press
§ to open the cassette holder.
2
With the tape deck turned off, wipe the heads, the
pinch roller, and the capstan with a cotton swab
slightly moistened with alcohol or a commercially
available cleaning fluid for tape decks.
Do not insert a cassette until the cleaned areas are
completely dry.
pinch roller, and the capstan with a cotton swab
slightly moistened with alcohol or a commercially
available cleaning fluid for tape decks.
Do not insert a cassette until the cleaned areas are
completely dry.
Demagnetizing the heads
After 20 to 30 hours of use, or when you notice a
hissing sound or loss of high frequencies, demagnetize
the heads with a commercially available demagnetizer
for tape decks. Please refer to the instructions of the
demagnetizer.
hissing sound or loss of high frequencies, demagnetize
the heads with a commercially available demagnetizer
for tape decks. Please refer to the instructions of the
demagnetizer.
Inside of the cassette holder
Erasing head
Capstan
Playing/Recording head
Pinch roller
§
R
®
§
º
‚
REC MUTE
PAUSE
REC
π
·
OFF
L R
MPX
FILTER
FILTER
DOLBY NR
BALANCE
AUTO CAL
EJECT
REC LEVEL
0
1
2
3
4
5
6
7
8
9
10
MEMORY
C
C
B
B
S
S
AMS
AMS
∏
RESET
COUNTER
PHONES
U