Sony TCD-D100 사용자 설명서
16
EN
When “— —” flashes for the program number
“— —” indicates an unrecorded segment. Press the
= 0 button to rewind the tape until “— —” stops
flashing. Then, press the ) + button to locate the
end of the previous recording.
“— —” indicates an unrecorded segment. Press the
= 0 button to rewind the tape until “— —” stops
flashing. Then, press the ) + button to locate the
end of the previous recording.
Recording from a microphone
1
Insert a cassette and locate the
point at which to begin recording.
point at which to begin recording.
2
Set the MIC/LINE IN switch to
MIC.
MIC.
3
Set the MIC ATT switch.
0 dB: Normal
20 dB: For loud sound
20 dB: For loud sound
4
Set the MANUAL•MIC
LIMITER•AUTO (AGC) selector
to AUTO (AGC).
The tape-corder adjusts the
recording level automatically.
LIMITER•AUTO (AGC) selector
to AUTO (AGC).
The tape-corder adjusts the
recording level automatically.
To adjust the recording level
manually, set the selector to
MANUAL or MIC LIMITER. (See
page 24.)
manually, set the selector to
MANUAL or MIC LIMITER. (See
page 24.)
5
Select the sampling frequency.
Set the SP•LP switch to SP
(Standard Play mode 48 kHz or
44.1 kHz).
(Standard Play mode 48 kHz or
44.1 kHz).
To record in the Long Play mode,
set the switch to LP. (See page
25.)
set the switch to LP. (See page
25.)
SP
48kHz
44.1kHz
LP
MANUAL
AUTO(AGC)
MIC LIMITER
MIC LIMITER
0dB
20dB
MIC ATT
MIC
LINE IN
MIC/LINE IN
Recording