Sony TC-TX313 사용자 설명서

If you run into any problem using this tape
deck, use the following checklist.

First, check that the mains lead is connected
firmly and the speakers are connected
correctly and firmly.

Should any problem persist, consult your
nearest Sony dealer.

•Press any of the operation buttons after 

∏

stops flashing. (The buttons on the tape
deck do not work for about two seconds
after the tape deck turns on.)

•No cassette is inserted. Insert a cassette.

•There is slack in the tape.  Take up any

slack in the tape.

•The heads are dirty.  Clean them.
•Make sure the audio connecting cords are

connected correctly (see page 5).

•No cassette is inserted.
•The tab has been removed from the

cassette. Cover the broken tab with
adhesive tape (see page 10).

•The tape has wound to the end.

•The heads are dirty.  Clean them.
•The record/playback heads are

magnetised.  Demagnetise them.

•The record/playback heads are

magnetised.  Demagnetise them.

•The capstans in the tape deck are dirty.

Clean them using a cleaning cassette.

Clean the tape heads after every 10 hours of use.
When the tape heads become dirty

— the sound is distorted
— there is a decrease in sound level
— the sound drops out
— the tape does not erase completely
— the tape does not record.

Be sure to clean the tape heads before you start an
important recording or after playing an old tape.
Use a separately sold dry-type or wet-type cleaning
cassette.  For details, refer to the instructions of the
cleaning cassette.

Demagnetise the tape heads and the metal parts
that has contact with the tape after every 20 to 30
hours of use with a separately sold demagnetising
cassette.  For details, refer to the instructions of the
demagnetising cassette.

Use a soft cloth slightly moistened with mild
detergent solution.
Never use strong solvents, such as thinner or
benzene, since they may damage the finish.

If you have any questions or problems concerning
your tape deck, please consult your nearest Sony
dealer.