Sony xbr60lx900 사용자 설명서

(except XBR-60LX900)
Fixing screws for Table-Top Stand 
(M5 × 16) (4) (except XBR-60LX900)
Assembling screws for Table-Top Stand 
(M5 × 16) (4) (XBR-40LX900 only)
Bottom cover (1)

(XBR-52/46/40LX900 only)
Silver spacers (4)

(XBR-60LX900 only)
Screws (M6 × 20) (4)

(XBR-60LX900 only)
3D Glasses (battery included) (2)
Pouch for 3D Glasses (2)

*1 Please refer to the model name printed on the 

remote control.

*2 XBR-40LX900 requires assembling.

Refer to other leaflet to assemble the Table-Top 
Stand.

*3 For XBR-60LX900, the bottom cover is factory-

attached to the TV.

*4 For XBR-60LX900, the stand rear cover is 

factory-attached to the Table-Top Stand.

*5 These screws and spacers are required when 

installing an optional Wall-Mount Bracket. You 
must use these screws instead of the ones 
provided with the bracket for safety reasons. Be 
sure to keep them in a safe place until you are 
ready to use the Wall-Mount Bracket. See page 
23 for the recommended Wall-Mount Bracket for 
your TV.

1

Remove the protection sheet.

2

Push and slide the cover upward.

• Point your remote control directly at the IR 

sensor located on your TV.

• Make sure that no objects are blocking the 

path between the remote control and the IR 
sensor on your TV.

• Fluorescent lamps can interfere with your 

remote control; try turning off the fluorescent 
lamps.

• If you are having problems with the remote 

control, reinsert or replace your batteries and 
make sure that they are correctly inserted.