Sony xbr-55x900a 사용자 설명서

D:\SONY TV\SY130089_H20 (Rev-2)\4462778121_US\US03STU.fm

XBR-65X900A/55X900A

4-462-778-12(1)

~
• If using an electric screwdriver, set the 

torque at approximately 1.5 N·m 
{15 kgf·cm}.

Attach the under cover.

To detach the Table-Top Stand from the TV, 
remove the screws 

 fixed in step 2. 

~

• Do not remove the Table-Top Stand for any 

reason other than to install corresponding 
accessories on the TV.

• Be sure the TV is vertical before turning on. 

To avoid uneven picture uniformity do not 
power on the TV with the LCD panel facing 
down.

• When installing the TV on a wall, remove the 

screws from the rear of the TV. Be sure to 
store the removed screws in a safe place, 
keeping them away from children.

• When attaching the Table-Top Stand again, 

be sure to fasten the screws (previously 
removed) to the original holes on the rear of 
the TV.

~

• Use an antenna cable connector no greater 

than 14 mm thick.

• Use an HDMI cable connector within 12 mm 

(thickness) × 21 mm (width).

• Use Sony HDMI cable with “High Speed” 

indication for HDMI connection.

• For more information on connections, refer to 

the i-Manual.

x

Set Top Box

(Continued)