Sony xes-z50 사용자 설명서
8
Overview
Overview
Initial Settings
Do the following initial settings (1) before
you operate the system for the first time,
(2) after replacing the car battery, or (3)
after resetting the system.
you operate the system for the first time,
(2) after replacing the car battery, or (3)
after resetting the system.
1
Press the reset button (see page 7).
The Contrast indication appears.
Press ? or /. The contrast is adjustable in 15 steps.
Contrast
8
2
Press ENTER.
The ACC Position indication appears.
Press ? or /. Select ”yes“ if your car’s ignition
switch has an ACC position; select ”no“ if your car’s
ignition switch has no ACC position.
switch has an ACC position; select ”no“ if your car’s
ignition switch has no ACC position.
ACC Position
yes
no
Cursor buttons
ENTER button
Note
You can specify the
ACC position and
cross-over network
settings only in the
initial setting
procedure. To change
these settings
afterwards, press the
reset button and repeat
the procedure.
You can specify the
ACC position and
cross-over network
settings only in the
initial setting
procedure. To change
these settings
afterwards, press the
reset button and repeat
the procedure.