Denon AVR-1312 사용자 설명서

19

• Some listening modes cannot be selected, depending on the audio 

format or number of channels of the input signal. For details, see 
“Types of input signals, and corresponding surround modes” 
(

• Adjust the sound field effect with the menu “Audio Adjust” 

) to enjoy your favorite sound mode. 

• Buttons on the remote control unit can be 

used for operations.
Press 

0

 or 

1

 and 

the modes are switched as shown below.

DIRECT

STEREO

PLg (or PLgx)

z

DTS NEO:6

z

MULTI CH STEREO

z

VIRTUAL

z

 

z  The display varies depending on the audio format or the number of 

channels of input signals.

This unit can play input audio signals in multi-channel surround mode or in stereo mode. 
Select a listening mode suitable for the playback contents (cinema, music, etc.) or according to your liking.

For 2-channel signal input:
• Surround-channel signals are created and played with surround playback. 
For multichannel signal input:
• The surround signal recorded in source is played as surround playback. 

(The sound is played according to the settings of the speaker size in  

C

 

page 5 “Speaker Config.”

.)

• Surround-back-channel signals that are not recorded in source can be 

created.

This mode is for enjoying stereo sound from all speakers.

This mode is for enjoying surround effects using only the front speakers 
or headphones.

• If multichannel signals are input, they are mixed down to 2-channel audio 

and are played.

• Subwoofer signals are also output.

Sound recorded in source is played as is. 
• Surround back signals are not created. 
• In this mode, the following items cannot be adjusted. 

• Tone (

)

• RESTORER (