Sony xs-f6932sl 사용자 설명서

A depth of at least 80 mm is required for flush mounting. Measure the depth of the area where you are
to mount the speaker, and ensure that the speaker is not obstructing any other components of the car.
Keep the following in mind when choosing a mounting location.
•Make sure that nothing is obstructing around the mounting location of the rear tray where you are to

mount the speaker.

•A hole for mounting may already be cut out of the inner panel of the rear tray. In this case, you need

to modify the board only.

•If you are to mount this speaker system in the rear tray, make sure that the speaker terminals, frame

or magnet do not touch any inner parts of the car, such as the torsion bar springs (when you open or
close the trunk lid), etc.
Also make sure that the speaker grille does not touch any inner fittings, such as seat belts, head rests,
center brake lights, inner covers of the rear wipers, curtains or air purifiers etc.

1

2

3

×

×

Mark the four bolt holes and make them 3.3 mm* in diameter.

*  When using 6: ø 5 mm

*

4

×

5

6

×

 ×

×

1

4

*

2

5

6

4

c

3

2

3

2

c

ø 3.3 mm