Nokia 6110 서비스 매뉴얼
PAMS
Technical Documentation
NSE–3
Tuning Instructions
Page 13
Original 11/97
3. Tuning of Transmitter Power Levels
This adjustment loads the power levels of the phone transmitter into the
EEPROM. When doing this, a pulse power meter or spectrum analyzer
must be used.
EEPROM. When doing this, a pulse power meter or spectrum analyzer
must be used.
Power levels programming:
– Select
Tuning –> TX Power...
– Select I/Q tuning values from PC’s memory, phone’s EEPROM or fac-
tory default values.
– Set power supply voltage 8.4 V to service battery (or 3.6 V to jig).
– Connect pulse power meter or spectrum analyzer to antenna connec-
tor.
– Check that channel is 60.
– Adjust the power level (levels 5, 15 and 19) by clicking the + and –
buttons, and change levels with
↑
and
↓
keys.
Power
level
level
Tuning P
OUT
/dBm
(CH 60)
5
32.5
15
13.0
19
7.0
Base
–20.0
Note: If the base calculation feature is enabled, then the base level is
calculated automatically.
calculated automatically.
– Press
Calculate
button to calculate all other levels.
– Once all TX levels are correct, press
SAVE
button.