Nokia 6590 서비스 매뉴얼
CCS Technical Documentation
Disassembly Instructions
NSM-9DX
Issue 1 10/02
¤Nokia Corporation
Page 5
Remove the 6 screws.
Drive size is torx plus 6.
Tightening torque is 17 Ncm.
Fastening order in the picture
in disassembly.
In assembly check that PWB is not
bent.
Tightening torque is 17 Ncm.
Fastening order in the picture
in disassembly.
In assembly check that PWB is not
bent.
Note! Screws contain thread lock
ing compound. Used screws must
be scrapped and not used again.
ing compound. Used screws must
be scrapped and not used again.
Remove UI module.
1. Use plastic tweezers or similar
tool to gently press the UI module
locking snap.
tool to gently press the UI module
locking snap.
Note locking snaps when assem
bling UI.
bling UI.
2. Carefully lift up the UI module.
1
2
UI handling precautions!
Do not damage the following
items when handling the UI
module:
1. Speaker spring contacts.
2. LCD driver.
3. LCD contact pads.
4. UI PWB contact pads.
5. UI frame metal coating.
items when handling the UI
module:
1. Speaker spring contacts.
2. LCD driver.
3. LCD contact pads.
4. UI PWB contact pads.
5. UI frame metal coating.
1.
3.
2.
4.
5.
6.
Note! Screws may be used a maximum of
four times before having to be scrapped
and not used again.
four times before having to be scrapped
and not used again.
, and 1100rpm.