Nokia 6820 서비스 매뉴얼

CCS Technical Documentation

5 - Service Software Instructions

                              Company Confidential

RH-26

Issue 1 02/04                              Copyright ©Nokia. All rights reserved.

Page 71

PA Low Mode with EDGE on.

This tuning step is not required for the RH-26 product, phone will not react to any con-
trols.

12 Click “Save & Continue”.

If all coefficients are within specified limits, tuning continues on the GSM1800 
PA High Mode with EDGE off

13 Set power meter (or spectrum analyzer) as required.

14 Repeat the same steps as for EGSM High and Low Mode above.

15

Tune base level and power levels 15,11 and 0 to target level.

16 When tuning values are correct, click “Save & Continue”.

If all coefficients are within specified limits, tuning continues on the GSM 1800 
PA High Mode with EDGE on.

17 Set power meter (or spectrum analyzer) as required.

18 Repeat the same steps as for EGSM High and Low Mode above.

When EDGE is on, the tuning must be made for all power levels.

19

Tune base level and all power levels from 15 to 2 to target level.

20 When tuning values are correct, click “Save & Continue”.

If all coefficients are within specified limits, tuning continues on the GSM 1900 
PA High Mode with EDGE off.

21 Set power meter (or spectrum analyzer) as required.

22 Repeat the same steps as for EGSM High and Low Mode above.

23

Tune base level and power levels 15,11 and 0 to target level.

24 When tuning values are correct, click “Save & Continue”.

If all coefficients are within specified limits, tuning continues on the GSM 1900 
PA High Mode with EDGE on.