Panasonic BT-LH1760E 사용자 설명서
10
SDI (HD/SD) terminal (BNC)
IN1
IN1
: This is the SDI input terminal (compatible with HD/SD automatic switching).
IN2
: This is the SDI input terminal (compatible with HD/SD automatic switching).
SWITCHED OUT : This is the active through-out terminal for the SDI input signal being displayed on the screen.
* SDI active through-out is only output when [SDI1] or [SDI2] is selected using the [INPUT SELECT] buttons.
* SDI active through-out is only output when [SDI1] or [SDI2] is selected using the [INPUT SELECT] buttons.
It is not output when anything other than SDI is selected. This terminal supports embedded audio.
When multiple monitors are connected in a daisy chain* pattern using the SDI active through-out, flicker or
noise may occur on the screen, depending on the quality of the original signal, length of cables or the
number of monitors connected.
* Daisy chain connection:
This is a connection method for distributing a signal to two or more devices by connecting the through-out
terminal of the first device to an input terminal of the second device, the through-output terminal of the
second device to an input terminal of the third device, and so on.
When multiple monitors are connected in a daisy chain* pattern using the SDI active through-out, flicker or
noise may occur on the screen, depending on the quality of the original signal, length of cables or the
number of monitors connected.
* Daisy chain connection:
This is a connection method for distributing a signal to two or more devices by connecting the through-out
terminal of the first device to an input terminal of the second device, the through-output terminal of the
second device to an input terminal of the third device, and so on.
VIDEO terminal (BNC)
*1*2
IN
: This is the VIDEO signal (composite signal) input terminal.
OUT : This is the input signal through-out terminal.
DVI-D terminal (DVI-D)
An HDCP compliant DVI-D signal input terminal.
An HDCP compliant DVI-D signal input terminal.
YP
B
P
R
/RGB terminal (BNC)
*1*2
IN
: This is the YP
B
P
R
/RGB signal input terminal.
OUT : This is the input signal through-out terminal.
* When using the RGB signal, you can also connect the external synchronizing signal to the SYNC/HD
* When using the RGB signal, you can also connect the external synchronizing signal to the SYNC/HD
terminal. When using a PC RGB signal, connect the horizontal synchronizing signal to the SYNC/HD
terminal, and the vertical synchronizing signal to the VD terminal.
terminal, and the vertical synchronizing signal to the VD terminal.
VD IN input terminal
This is the vertical synchronizing signal (VD) input terminal used when connecting to a PC RGB signal.
This is the vertical synchronizing signal (VD) input terminal used when connecting to a PC RGB signal.
AUDIO input terminal (pin jack)
This is the common audio input terminal for all video input terminals.
* SDI input audio is automatically selected by selecting [SDI1] or [SDI2] with [INPUT SELECT].
This is the common audio input terminal for all video input terminals.
* SDI input audio is automatically selected by selecting [SDI1] or [SDI2] with [INPUT SELECT].
HEADPHONES output connector (Stereo mini-jack M3)
Connect a pair of headphones to monitor the sound.
* The sound volume and sound quality will depend on the headphones. Note that plugging in a pair of
Connect a pair of headphones to monitor the sound.
* The sound volume and sound quality will depend on the headphones. Note that plugging in a pair of
headphones turns off the speakers.
GPI input terminal (D-SUB 9-pin)
External control is possible by using a GPI signal.
External control is possible by using a GPI signal.
RS232C input terminal (D-SUB 9-pin)
External control is possible by using a RS232C signal.
*1 Unless a cable is connected to the OUT terminal, the VIDEO IN terminal is automatically terminated at
External control is possible by using a RS232C signal.
*1 Unless a cable is connected to the OUT terminal, the VIDEO IN terminal is automatically terminated at
75
Ω. Connecting a cable releases this termination.
*2 Since a connection to the through-out terminal releases the 75
Ω termination of the unit, the level of the
video signal input to the unit may become too large depending on the connected device.
Rear panel
6
8
9
1
2
3
4
5
7
Controls and Their Functions
(continued)