Panasonic cf-27fccxxxx 사용자 설명서
9
When needed, the touchscreen can be configured using the following steps.
Configuring the Touchscreen
Make necessary changes
For more information, click
at the upper right corner.
Click [OK]
2
1
3
NOTE
Select
from the taskbar and then select [Touchscreen] or
select [Touchscreen] in [Start] - [Settings] - [Control Panel] -
[Mouse]
[Mouse]
The following screen will appear.
Advanced configuration
Calibration & Test
Define the calibration setup. Use
this procedure when the cursor
and your (finger) touches do not
appear to agree. (Necessary for
changes in the alignment of the
touchscreen with visual images or
an adjustment of the display reso-
lution.)
this procedure when the cursor
and your (finger) touches do not
appear to agree. (Necessary for
changes in the alignment of the
touchscreen with visual images or
an adjustment of the display reso-
lution.)
.
Touch the “+” mark on the calibra-
tion screen for about one second.
After the calibration procedure is
executed (i.e., after the nine “+”
marks are touched), the proce-
dure ends when the
tion screen for about one second.
After the calibration procedure is
executed (i.e., after the nine “+”
marks are touched), the proce-
dure ends when the
Enter
is
pressed.
Set the advanced settings.
Test for the “Double click settings“.
The double-click speed of the Touchscreen can be changed in [Tap and
Buttons]* in [Start] - [Settings] - [Control Panel] - [Mouse].
[Name:] in [General] can not be changed even when the touchscreen driver is
installed.
Buttons]* in [Start] - [Settings] - [Control Panel] - [Mouse].
[Name:] in [General] can not be changed even when the touchscreen driver is
installed.
NOTE
Touchscreen
Test
Double click settings
Set the width and height of
the double click.
the double click.
* [Buttons] is displayed, depending on the computer.