Panasonic DMR-E75V 사용자 설명서

≥DVD-Video:

You can play DVD-Video multi channel surround by digitally connecting an amplifier 
equipped with a Dolby Digital and a DTS decoder.

≥DVD-Audio:

This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.

–

≥You cannot directly connect to the unit. Connect through the amplifier etc.

≥We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the 

color difference signals (P

B

/P

R

) and luminance signal (Y) separately in order to achieve 

high fidelity in reproducing colors. If the TV is compatible with progressive output, a high 
quality picture can be output because this unit’s component video output terminal outputs 
a progressive output signal.

≥All Panasonic TV that have 480P input terminals are compatible. Consult the 

manufacturer if you have another brand of TV.

–

≥You can play them if the video standard is NTSC.
≥However, you cannot play DVD-Video if their region number does not include “1” or 

“ALL”.

–

≥The DVD-Video region number indicates the disc conforms to a standard. You cannot 

play discs that do not have a region number.

–

≥This unit records and plays DVD-R. However, you cannot record onto DVD-R discs that 

are finalized.

≥This unit also records and plays 1k–4k recording speed DVD-R discs.
≥This unit does not record or play DVD-RW.

≥You can play CD-R and CD-RW on this unit that are created using a compatible format.
≥You cannot write to a CD-R or CD-RW with this unit.

18, 24

≥Most commercially sold video cassettes and DVD are copy protected; therefore, 

recording is usually not possible.

–

≥You can play on DVD-R compatible players after finalizing the disc on this unit; however, 

due to the condition of the recording, play may not be possible.

≥You can write to the disc approximately 100,000 times depending upon the conditions of 

use.

–

≥You cannot record digital signals. The digital audio terminals on this unit are for output 

only.

–

≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio 

Output” settings to the following from the SETUP menu.
- PCM Down Conversion “ON”
- Dolby Digital “PCM”
- DTS “PCM”
However, only
- As long as digital recording from the disc is permitted.
- As long as the recording equipment is compatible with a sampling frequency of 48 kHz.

≥You cannot record MP3 signals.

–

≥With DVD-RAM, you can, and the audio recorded also changes. Just press [AUDIO].
≥With DVD-R, you cannot. Change before recording with the “Select MTS” in the SETUP 

menu.

27
44

PP-Sample.book  64 ページ  ２００４年３月８日　月曜日　午後６時３分