Panasonic gph5d 사용자 설명서

Left/Right

Action

VOL

Status

Return

VOL Up/Dow n

Serviceman mode

CAT (computer aided test) Mode

CAT mode menu

CAT Panel

sys8.1

IIC Mode

CD Mode

SD Mode

MS Mode

ID Mode

Remote Control

How to access the CAT mode.

Press and hold the Volume/Down button on the
front panel of the unit and press the status
button on the remote control three times within
one second, this will place the unit into the CAT
Mode.

To exit the CAT mode, access the ID mode and

switch off the main power.

C Mode

Select the I

C mode by pressing the Up/Down button on the remote control from

the front page of the CAT menu, and then press the Action button on the
remote control.

How to use the I

C mode?

1. Select the alignment subject by pressing the

UP/Down buttons on the remote control.

2. Select the alignment item by pressing the Left

and Right buttons on the remote control.

3. Adjust the optimum setting by pressing the

Volume Up/Down buttons on the remote
control.

4. The data is memorized when the R button is pressed on the remote control

or the alignment Subject (or item) is changed.

To exit the I

C mode, press the R button on the remote control.

Mode

Function

Access Button

IIC

Service Alignment

Action

CD
(Complete
Diagnostics)

Software Version
Information EEPROM
Edit

Mute
More than 5
seconds

SD (Status
Display)

MTBF Parameter

Action

MS Mode

Not used

------

Not used

------