Panasonic KVS4085CW 사용자 설명서
3.
Remove dirt on the sensors with the included blower ( 1 ), then wipe the image sensor covers with the
roller cleaning paper (page 48).
roller cleaning paper (page 48).
How to clean the sensors and reflectors
Remove the brush from the blower ( 1 ), place it on the holes for the sensors and reflectors ( 2 ), as well
as the conveyor indentations ( 2 ), and blow off dirt, as shown in the illustration below.
as the conveyor indentations ( 2 ), and blow off dirt, as shown in the illustration below.
1
2
Location of Sensors
5
4
4
3
6
7
3
Waiting sensor
4
Skew sensors
5
Double feed detectors
(For the KV-S4065CL /
KV-S4065CW, there is only 1 double
feed detector in the center.)
(For the KV-S4065CL /
KV-S4065CW, there is only 1 double
feed detector in the center.)
6
Starting sensor
7
Image sensor cover (B)
9
10
8
8
Double feed detectors
(For the KV-S4065CL /
KV-S4065CW, there is only 1 double
feed detector in the center.)
(For the KV-S4065CL /
KV-S4065CW, there is only 1 double
feed detector in the center.)
9
Paper sensor
10
Image sensor cover (F)
Operating Manual
55
Care and Maintenance